2019 Ninja ZX-10R KRT Replica Promotions


Model Description


GET CLOSER

The Kawasaki Racing Team and Kawasaki factory in Japan forged a performance partnership to develop the new Ninja ZX-10R. Tested, refined and approved by World Champion’s Jonathan Rea and Tom Sykes, this is as close as it gets to being part of the official Kawasaki World Superbike team. Ninja ZX-10R Get Closer.

Colour option UK – Lime Green, Ebony, Metallic Graphite Grey

Model Specification


  • Engine

    Engine Type

    Liquid-cooled, 4-stroke In-Line Four

    Displacement

    998 cm

    Bore x stroke

    76.0 x 55.0 mm

    Compression ratio

    13.0:1

    Valve/Induction system

    DOHC, 16 valves

    Fuel system

    Fuel injection: Ø 47 mm x 4 with dual injection

    Ignition

    Digital

    Starting

    Electric

    Lubrication

    Forced lubrication, wet sump with oil cooler

    CO2 Emission

  • Performance

    Maximum Power

    149.3 kW {203 PS} / 13,500 rpm

    Maximum power

    Maximum power with RAM Air

    154.4 kW {210 PS} / 13,000 min

    Maximum torque

    113.5 N.m {11.6 kgf.m} / 11,500 min

  • Transmission

    Transmission

    6-speed, cassette

    Final Drive

    Sealed chain

    Clutch

    Wet multi-disc, manual

  • Frame

    Frame type

    Twin spar, cast aluminium

    Rake/Trail

    Trail: 107 mm

    Wheel travel

    Front: 120mm Rear: 114mm

    Steering angle

    27° / 27°

    left / right

    Seat Height

    835mm

    Curb Mass

    206kg

    Ground Clearance

  • Dimensions

    Dimensions (L x W x H)

    2,085 x 740 x 1,145 mm

    Wheelbase

    1,440 mm

  • Suspension

    Suspension

    front

    rear

    Suspension front

    43 mm inverted fork with rebound and compression damping, spring preload adjustability and top-out springs

    Suspension rear

    Horizontal Back-link with gas-charged shock and top-out spring. Compression damping: Stepless, dual-range (high/low-speed). Rebound damping: Stepless. Spring preload: Fully adjustable

  • Brakes

    Brakes

    Front - Dual semi-floating 310 mm petal discs. Caliper: Dual radial-mount, opposed 4-(aluminium) piston. Rear - Single 220 mm petal disc. Caliper: Single-bore pin-slide, aluminium piston